Fly TMC5160 V1.2 DINrail mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
5160 external drivers DIN rail mount with active cooling
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 153
- Makes
- 1
- Views
- 860
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution
Fly TMC5160 V1.2 DINrail mount
Compact DINrail mount for FLY TMC5160 V1.2 or V1.5 if you use a VORON printer and just need two, instead of four drivers.
12V 4010 axial fans can be clipped inside of the mount if your flow settings are correct.
Noctua NF-A4x10 wont fit because of the rubber bushings.
A Noctua version will be available in the future if needed.
- Added 4020 fan version (not tested yet)
- Added +5mm spacer version
- Added 5mm spacer (quick and dirty, scaled 60mm version to 40mm and added negative volumes to enlarge the holes, I used the spacer from AidsOnWheels )
Use one pcb clip from VORON repository to attach bottom bracket to the DINrail.
LINK for pcb clip
Threaded inserts are not needed, just use M3 screws directly.
Additionally needed
- 2x M3 countersunk socket head screws for pcb clip
- 4x M3 button head screws or socket head caps to mount PCBs with Bottom
- 4x M3 countersunk screws to connect bottom with top
- no screws are needed for the fans
I recomend to use supports in the middle of the top part.