Counting matching models…
A 3D printed case for the Bigtreetech TMC5160T Plus based on their CNC case. This is a relatively complex and thin print with fully supported holes that stays within the footprint of the board. This model supports the attachment of a 3010…
For external stepper driver BTT TMC5160T PLUS V1.0 (w/o case) . Assembly Guide Fit [POS 2 - adapter] to [POS 3 - DIN rail bracket] using 2x [POS 6 - screw - M3x8] to create [sub assembly 1]. Fit [POS 5 - axial fan - 3010] to [POS 1 - fan…
Fly TMC5160 V1.2 DINrail mount Compact DINrail mount for FLY TMC5160 V1.2 or V1.5 if you use a VORON printer and just need two, instead of four drivers. 12V 4010 axial fans can be clipped inside of the mount if your flow settings are…
Sorry for the bad Fusion design, still learning. Had to design my own and shift it above the DIN rail to get more space on the V-Core 3 200. The DIN bracket is not my design this is reused because it fits nice and has heat inserts. DIN…
This is a MCU Board mounting bracket for Octopus and Manta M8P that holds 4 BTT TMC5160T Pro drivers for AWD Mods/VZbot. BOM: 20X M3*4*5 Heat set inserts 20X M3*8 SHCS (If using the fan cases in the picture then 16X M3*10 and 4X M3*8) Two…
Here’s a simple and effective DIN mount for the BigThree Tech Octopus Pro with 4 x 5160T Plus stepper drivers. In addition to holding the motherboard and stepper drivers, this mount also allows you to install 4 x 40mm fans to cool the…
This is a mount to retrofit 4x BTT TMC5160T Plus drivers onto the VzBot Mellow Super 8 Mount as designed by Simon Vez in place of the Melllow TMC5160 drivers. The mount elevates the drives sufficiently to clear most wiring channels. Add…
Double DIN Mount BTT TMC5160T Plus Narrow DIN rail mount for two BTT TNC5160T Plus external stepper drivers using the Voron PCB DIN rail clips. BOM 8x M3x8 (SHCS or BHCS) 4x M2x8 selftapping screws (uses the standard Voron ones) 2x BTT…
Needed to mount my drivers and this was the best solution I could come up with.
This is a Mellow Fly TMC5160TA Mount for my DIN Rail Bracket. You can find the bracket here ! In addition I created a fan mount. The fan mount can be used without the rail mount. The fan mount is for 40mm fans. The printable spacer can be…
I made this to go with https://www.printables.com/@TallBoy_436908 's BTT5160TplusMountVzBot.stl It uses 8xM3 heat inserts. Added a VZBot logo for my VZ330 build. If you would like a plain one let me know. Also made a shroud for just one…
Remixed to fit my Voron 2.4 250 mm with 2x TMC5160T Plus and Manta M8P V2.0 board.
A placeable component for the Bumbag Customizable Enclosure System . Find the product here . This model incorporates a modified version of the 3D model published by BIGTREETECH here .
All credit to Phantom16361 for the original design. There was a slight error in the hole placement of the 5160 Plus mounts. The picture with the bracket in blue is the original hole spacing. The one showing the yellow/tan color bracket is…
I'm running the XY motors on my Annex Engineering K3 at 48V, and I'm using BTT's external TMC 5160s (TMC5160T Plus) as the stepper drivers. I needed to mount them, and specifically, I needed enough room for an Octopus Pro (mounted…
A simple mount that can be clamped into alumumium profiles to hold the TMC5160T Plus in place. The Holder needs to be screwed and you have to solder heat inserts. After that you need to decide how you want to mount your drives. As you are…
I made/used it so that i could screw the motor drivers onto a wooden board without the solder joints pressing into the wood. It also raised the drivers slightly so that they were protected from moisture on the board The open side should…
Add option to mount across the DIN rail. BOM: 4x M3 8mm button head for modules (socket head also work) 2x M3 8mm socket head for DIN mount 4x M3 12mm socket head for fan bracket 8x M3 14mm socket head for fans
Same as original but used the same trick voron parts use to make the holes printable
Requires 22x Voron style M3 heat inserts. The MOSFET module is used to level-shift the motherboard PWM (for example to control one 12V fan on a 24V printer). I have made a provision for the Z endstop wiring in case someone still uses a Z…
DIN rail adapter for use with BTT TMC5160T w/ Case Recommend using button head cap screws for mounting.
You can identify your version of the Stepper Driver by seeing if thedriver has R022 resistors, which is the v2 (the version that BTT should be shipping right now) or R512 resistors, for the v1 of them. Right now its only the holder but…
Remix for MellowTMC 5160T Plus. Inserts m3*4*5 Screws m3*12 Screws m3*8
