1 / 6
Bigtreetech TMC5160T Plus double DIN rail mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
DIN Rail Mount for 2x BTT TMC5160T Plus external stepper drivers. Uses the Voron PCB DIN clips
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 112
- Makes
- 0
- Views
- 852
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
Double DIN Mount BTT TMC5160T Plus
Narrow DIN rail mount for two BTT TNC5160T Plus external stepper drivers using the Voron PCB DIN rail clips.
BOM
- 8x M3x8 (SHCS or BHCS)
- 4x M2x8 selftapping screws (uses the standard Voron ones)
- 2x BTT TMC5160T Plus
- 2x VoronDesign PCB DIN rail clips (https://github.com/VoronDesign/Voron-Trident/blob/main/STLs/ElectronicsBay/pcb_din_clip_x3.stl)
Print Settings
- ABS or ASA (only tested with these, other materials may have another shrinkage and may NOT fit)
- FDM
- Layer height: 0.2 mm
- Extrusion width: 0.4 mm
- Infill percentage: 40%
- Wall count: 4
- Solid top/bottom layers: 5
Assembly
- Mount the PCB DIN clips using the 4x M2x8 selftapping screws. ATTENTION: offcentered mounting holes. Orient the clips, so that the din rail is centered
- Mount the TMC5160T Plus drivers using the 8x M3x8 screws. Orientation: Screw terminals must face outwards
