1 / 3
Playseat Challenge Heusinkveld Sprint Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bracket for mounting a Heusinkveld Sprint Baseplate to the pedal base of a Playseat Challenge rig.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 31
- Makes
- 0
- Views
- 812
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Bracket for mounting a Heusinkveld Sprint Baseplate to the pedal base of a Playseat Challenger rig.
Materials
A complete pack of 4 brackets requires the following new materials:
- 8x M6x35 bolt (socket head cap)
- 8x M6 washer [optional]
- 8x M6 nut
In addition to the rig mounting materials included with the Heusinkveld Sprint Baseplate:
- 4x M5x12 bolt (hex head) or 4x M5x16 bolt (hex head)
- 4x M5 washer [optional]
- 4x M5 nut
Note: One of the included M5 nylock nuts seized on the bolt for me. Try the non-nylock nuts first then switch to the nylock nuts if you find the bolt loosening over time.
Instructions
- Print 4 pairs of top/bottom brackets
- Tested with both PLA and PETG
- Cut the foam on the pedal base to match your desired mounting positions
- Loosely assemble each bracket pair on the pedal base
- M5 bolt snaps into the top bracket
- M6 hardware connects the bottom bracket to the top bracket
- Mount and secure the baseplate with M5 washers and nuts
- Tighten all nuts