Folding laptop / tablet stand (print in place)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Compact folding laptop / tablet stand
- Rating
- 5 / 5
- Likes
- 105
- Downloads
- 942
- Makes
- 6
- Views
- 3,412
- Reviews
- 7
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Summary
Ever needed to prop up your laptop or tablet at a more comfortable angle. This compact folding stand will prop up the laptop or tablet at approximately 18 degrees.
The stand folds down to approximately 8.5 inches (220mm) x 0.75 inch (24mm).
This is commercially available to purchase as well. But why not try printing one yourself :)
This does require well calibrated printer due to the tight tolerance. There is an 0.4mm air-gap and do not use supports for this print. This took 9h55m at 0.2mm layer height and 15% infill.
Happy printing :)
Print Settings
Rafts: No
Supports: No
Resolution: 0.2mm
Infill: 15 - 20
Filament material: PLA