Thumbring for Archery
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
turkish style thumbring for archery
- Rating
- 5 / 5
- Likes
- 37
- Downloads
- 279
- Makes
- 2
- Views
- 863
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Public Domain
i printed it in PLA (well… extrudr flax which is, as far as i know, PLA with flax fibres) and 100% infill. layerheight doesn't matter too much i guess since it needs quite a bit of sanding - inside for your finger and outside for the bowstring. the base isn't perfectly flat, so you have to move the model into the bed about 0.15mm.
i did quite well adjusting size by scaling in the slicer. either by just printing it smaller or bigger or by stretching just one dimension. i can say that it takes a 40 pound bow without problems, never had one break on me. be careful though - i found extrudr flax to make quite a tough print. if you're one of very few people who will find a use for this model: have fun!