Airbrush holder for HSW
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Holds your gravity fed airbrush in place.
- Rating
- 5 / 5
- Likes
- 64
- Downloads
- 215
- Makes
- 2
- Views
- 1,157
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
This screws into an HSW M4 attachment hex. It does need supports, but I was able to get away with setting them to “Buildplate Only” in Cura. I recommend printing it nose down, so that the cylinder looks good when it prints. I used the Lines supports, 15% density.
You may want to consider printing this in PETG, since I've had issues with the side flaps snapping off. I'll try to revise the design so that this happens less. Should still work with most airbrushes even if it does happen.
Both of my airbrushes have fairly small cups, so let me know if I need to add a version with more clearance to the wall for airbrushes with larger cups!
I'm likely going to continue tweaking the design in the coming days. In particular, maybe a version that prints in two pieces so that no supports are needed.