P1P front loading kit
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This kit relocates the spool mount to the front of the printer via a frame mounted base.
- Rating
- 5 / 5
- Likes
- 13
- Downloads
- 61
- Makes
- 3
- Views
- 681
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Are you looking to relocate your farming p1p printer spools to the front for easier access and visbility? If so, this kit does just that!
I have 5 P1P printers in a shelving unit that made it difficult to access the rear spool holder for swaps and refills. With the printers being so close together I was unable to utilize any of the side mount options I came across in my search for a solution, so i made my own. The mount holds the spool off the p1p's frame and infront of the printers. This allows for quick access when using a shelving unit. Zero issues with loading from the front as long as your PTFE tubes are pushed all the way into the connectors.
Parts required:
- x1 - PC4-m10
- x2 - #6-19 x 5/8
- x1 - PTFE tube.
- I used the spare section that came with my P1P's. May need to trim a few inches off as they all seem to be different sizes.
I've probably made 25 differnet spool holder designs but nothing seems to track as straight as a basic cylinder with a flared end. Excited to see what others have for ideas with the spool holder. If you decide to make your own holder - you simply need a 25mm x 10mm base on it that will slide into the side mount - the rest is up to you and your imagination.
Happy printing!