DOPE Card Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
D.O.P.E. card holder for PRS, NRL22 rifle matches
- Rating
- 5 / 5
- Likes
- 59
- Downloads
- 798
- Makes
- 3
- Views
- 2,753
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The holder is inspired (not a remix) by the DOPE Card Holder V3 by Tarz
Printed in Prusament Prusa Galaxy Black PETG with 30% infill.
Required hardware
- 2 x M4 12mm Button Head Socket Cap Screw (like these)
- 1 x M4 16mm Button Head Socket Cap Screw (like these)
- 3 x M4 Nut (like these)
Assembly is straight forward.
Two M4 nuts go into the bottom half-ring, two M4 12mm screws go screw two half-rings together.
Make sure to fully tighten the screw on the side where the D.O.P.E. card will be mounted first. Then adjusts the tightness of the ring using the screw on the opposite side.
Use the remaining M4 nut and M4 15mm screw to attach the D.O.P.E. card to the clamp's “ears”.
Data can be written on a blank PVC ID (like these) card using a dry erase pen. Holder allows effortless changes of the cards with the data specific to a match stage.