Zooz 4-in-1 Sensor mounting bracket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Taping the Zooz 4-in-1 Sensor on edge doesn't make for a durable mount. This gadget solves that.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 23
- Makes
- 0
- Views
- 163
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Share Alike
Our Zooz 4-in-1 Sensor was mounted on the wall at an angle using double-sided tape. When I removed it for painting I didn't have any more double-sided tape laying around but I did have a bunch of suitable screws on hand.
Problem is, I could not use them because that requires the sensor mounted perpendicular and this wasn't effective. There are no keyhole slots on the angled side so it was either wait until I could go buy some double-sided tape or design this bracket. Naturally, I choose the design-and-print option.
The bracket as printed on my Prusa MK3S fits loosely into the sensor and this is by design. If you want to modify for a more snug fit, feel free to edit the model online at Tinkercad.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
.15
Infill:
15%
Filament: Prusa PLA Silver
Notes:
The sensor weighs only a few ounces so this is a very lightweight usage. When hung the bracket is mostly hidden by the sensor. As a result, any material and any fill setting should work just fine.