1 / 4
Replacement Valve Stem Cap
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Valve stem cap : Standardized internal diameter. Screw on with no printed threads. PETG/ASA Print : 15 minutes or less!
- Rating
- 5 / 5
- Likes
- 169
- Downloads
- 632
- Makes
- 6
- Views
- 1,925
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Public Domain
Replace your lost or busted valve stem caps on pretty much any tire.
I used PETG. There is a chamfer 3mm up the inside diameter so you can thread the cap on without needing to print threads.
Note: you may also push the cap onto the valve stem although I recommend that you thread(screw) the cap on. It doesn't need to be lined up or perfectly perpendicular to the threads, it will straighten itself out while installing.