RIKTIG Draw Rod Clip
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Flexure to hold the RIKTIG draw rod, mounted with 2 screws instead of 1.
- Rating
- 4 / 5
- Likes
- 1
- Downloads
- 31
- Makes
- 2
- Views
- 169
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The flexure clip that is included with the RIKTIG draw rod only has 1 screw hole. The draw rod is quite long, so it's very easy (read: unavoidable) that you put a torque around this screw when grabbing or stowing the draw rod. I got annoyed by the mount being misaligned all the time, so here's a version that has 2 screw holes to react the torque!
The part is designed for #6 screws. I've included a STEP file in case you need to upsize or downsize these counterbores for what you have on hand.
It's very important that you print this in PETG. I'm pretty sure PLA would plastically deform or snap upon first install.