RIKTIG Draw Rod Clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Flexure to hold the RIKTIG draw rod, mounted with 2 screws instead of 1.
- Ocena
- 4 / 5
- Polubienia
- 1
- Pobrania
- 31
- Wydruki
- 2
- Wyświetlenia
- 169
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The flexure clip that is included with the RIKTIG draw rod only has 1 screw hole. The draw rod is quite long, so it's very easy (read: unavoidable) that you put a torque around this screw when grabbing or stowing the draw rod. I got annoyed by the mount being misaligned all the time, so here's a version that has 2 screw holes to react the torque!
The part is designed for #6 screws. I've included a STEP file in case you need to upsize or downsize these counterbores for what you have on hand.
It's very important that you print this in PETG. I'm pretty sure PLA would plastically deform or snap upon first install.