1 / 4
3-Way Filament Splitter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Provides three filament paths. In the case of the BL X1 you can dedicate one for the AMS and two for external sources.
- Rating
- 0 / 5
- Likes
- 41
- Downloads
- 184
- Makes
- 0
- Views
- 1,683
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution
Provides three filament source paths. I often need to switch out between AMS and multiple external filament boxes and this eliminates the tedious task of swapping out ptfe tubes for the two external dryboxes.
Assembly:
- Print the top and bottom cases flat side down.
- After printing remove the supports and press fit magnets and mini ptfe connectors. Prior to fitting the mini ptfe connectors remove the rubber grommet from the bottom.
- Slide the two case halves together using the dovetail channels, that last few mm will require a little more pressure to engage the pressure fit tabs on the dovetails.
Resources:
- 2x 15x3mm Neodymium Magnets: https://www.amazon.com/FINDMAG-Neodymium-Magnets-Whiteboard-Scientific/dp/B0B5G6XS4J/ref=sr_1_3?crid=3LMN411GWXW5L&keywords=15mm%2Bneodymium%2Bmagnet&qid=1696391538&sprefix=15mm%2Bidynium%2Bmagnet%2Caps%2C84&sr=8-3&th=1
- 4x Quick Jointer Coupler Straight Push PTFE Tube Extruder: https://www.aliexpress.us/item/3256802493948012.html?spm=a2g0o.order_list.order_list_main.5.21ef1802YebpSL&gatewayAdapt=glo2usa
Build Notes:
- Filament shown is PolyLite Grey ASA.
- Printed using BL PolyLite ASA filament profile at 0.16mm Optimal height with supports.