BIQU BX / H2 Extruder Front Mount 5015 Fan Duct
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
My take at a front mount part cooling solution for the BIQU BX and H2 Extruder. Combined with the stock fan and…
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 99
- Makes
- 0
- Views
- 697
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
My take at a front mount part cooling solution for the BIQU BX and H2 Extruder. Combined with the stock fan and running both in parallel you get 360° part cooling and much better overhang results. And just fyi, the stock fan plug is a JST-PH connector. I created a pigtail adapter to allow me to run both the stock fan and the front 5015.
Included is a 4040 20mm spacer block to space the TFT screen out far enough for full clearance.
I suggest printing in PETG or ABS for longevity.
Parts Needed:
- 5015 24v fan
- 2@ M3 x 8mm bolt (fan mount to extruder)
- 1@ M3 x 20mm bolt (to hold 5015 fan)
- 1@ M3 x 10mm bolt (fan duct to mount)
- 4@ M5 x 25mm+ bolt (TFT w/ spacer)
- 2@ M3 Nyloc nut
Print Settings
Printer:
BIQU BX
Rafts:
No
Supports:
Doesn't Matter
Resolution:
0.2
Infill:
30%
Filament:
Duramic PETGGreen
Category: 3D Printer Accessories