1 / 10
BIQU BX / H2 Extruder Front Mount 5015 Fan Duct — zdjęcie 1
1 / 10

BIQU BX / H2 Extruder Front Mount 5015 Fan Duct

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

My take at a front mount part cooling solution for the BIQU BX and H2 Extruder. Combined with the stock fan and…

Ocena
0 / 5
Polubienia
4
Pobrania
98
Wydruki
0
Wyświetlenia
695
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial

My take at a front mount part cooling solution for the BIQU BX and H2 Extruder. Combined with the stock fan and running both in parallel you get 360° part cooling and much better overhang results. And just fyi, the stock fan plug is a JST-PH connector. I created a pigtail adapter to allow me to run both the stock fan and the front 5015.

Included is a 4040 20mm spacer block to space the TFT screen out far enough for full clearance.

I suggest printing in PETG or ABS for longevity.

Parts Needed:

  • 5015 24v fan
  • 2@ M3 x 8mm bolt (fan mount to extruder)
  • 1@ M3 x 20mm bolt (to hold 5015 fan)
  • 1@ M3 x 10mm bolt (fan duct to mount)
  • 4@ M5 x 25mm+ bolt (TFT w/ spacer)
  • 2@ M3 Nyloc nut

Print Settings

Printer:

BIQU BX

Rafts:

No

Supports:

Doesn't Matter

Resolution:

0.2

Infill:

30%

Filament:

Duramic PETG

Green

Category: 3D Printer Accessories

Tagi