1 / 7
FT-5 OptiCooler for 713Maker Ultralight and Stock Hotend — image 1
1 / 7

FT-5 OptiCooler for 713Maker Ultralight and Stock Hotend

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a remix of printingotb's OptiCooler for the Folger Tech FT-5. I am running the 713Maker Ultralight carrier…

Rating
0 / 5
Likes
0
Downloads
12
Makes
0
Views
107
Reviews
0

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Noncommercial

This is a remix of printingotb's OptiCooler for the Folger Tech FT-5. I am running the 713Maker Ultralight carrier with the stock MK9 hotend for now, but it may also work with the Titan Aero extruder. The fan bracket simply mounts to the extruder stepper itself on the bottom two screw. Remove the screws and replace with 5mm longer screws. You may need a washer or 2. I also recommend printing the arms out of PETG or ABS with their proximity to the heater block.

This setup runs two 5015 radial fans wired together. Check original file for more info. I zip-tied them together to keep them in line.

NOTE: Adjust nozzles down as close the the bottom of the nozzle as possible without interfering with the print.

Print Settings

Printer:

Folger Tech FT-5

Rafts:

Doesn't Matter

Supports:

No

Resolution:

0.16mm

Infill:

30%

Category: 3D Printer Accessories

Tags