Simmons Titan 70 - Rack, Right Arm Pass-Thru Clamp Replacement
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
My toddler helped me unbox and set up my drum kit for the first time. I'll let you fill in the rest.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 72
- Makes
- 0
- Views
- 908
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a replacement for the outer jaw of the passthrough clamp for the right arm of the Simmons Titan 70 electronic drum kit.
updated 02 OCT '23
What changed:
- v1 replaced by v1.1, enlarged diameter of throughholes, increased counterbore depth
- v2 released
v1.1 has a 0.5mm chamfer where edges meet the build plate to help negate elephant's foot, and a 1.0mm fillet inside the counterbores to make it easier to print without supports.
v2 is my personal choice, but it's just an aesthetic switch-up. Whether or not you need to generate supports depends on if your printer can bridge the 46.5mm between posts. I didn't like how my edges looked without supports, so I added 2 thin stripes of tree supports, basically dividing it into 3 short bridge segments. Still manages to use a bit less filament than v1.1, and that's accounting for support material.
I use a 0.6mm nozzle, 0.675mm extrusion width, 0.3mm layer height, 4 perimeters, 3 bottom layers, and 6 top layers.
v1.1 uses ~22.5g of filament and takes me ~35 minutes to print.
v2 uses ~21.5g of filament and takes me ~48 minutes to print.
.STEPs are included for both versions in case anyone needs to mess with 'em.
Cheers!
**Imported from my Thingiverse profile. Dropped old post record on import.
Print Settings
Printer Brand:
Sovol
Printer:
SV04
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
0.3mm
Infill:
15% Rectilinear
Filament: Hatchbox PETG Black
Notes:
I personally use 4 perimeters so my walls come out a little thicker than the stock clamp.
Shameless Plug ==============
Appreciate what I'm doing and want to let me know?
I have a tip jar over at https://ko-fi.com/anvilhobbies, if you're feeling so inclined!
Any contributions are greatly appreciated!
Category: Music