pi2jamma mount for v2 boards

This is a mount for the pi2jamma adapter by arcadeforge.net, compatible with the V2 board, both their pro and premium models.

If you have an older board, there is another version for it.

There are two STL files: one that supports the 15mm standoffs that are supplied with the board, and one that needs no standoff and is all printed. I added four spots for the standoffs, but usually the board only needs/comes with three, so you can choose where the third one should go (it may block the ethernet or usb port, depending on Pi model). There should be enough space for handling the memory card on the Pi, both on the 3B+ and 4 models.

All holes are sized for m2.5 screws, and should be fine to just directly screw into the plastic, but you can also use inserts or tap it to other sizes if wanted. I used m2.5x8 to hold the Pi.

Also note that the GPIO connector isn't supposed to go all the way down, that's done to provide some spacing between the solder side of the pi2jamma and the Raspberry Pi USB ports and avoid shorts.

The FreeCAD source file is included and the height of the standoff can be changed using the /spreadsheet/ functionality on it. I also included a STEP file for compatibility with other CAD software.