WE airsoft Desert Eagle rail to Picatinny adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Use this to add unneeded scopes onto an airsoft pistol :D
- Rating
- 0 / 5
- Likes
- 30
- Downloads
- 205
- Makes
- 1
- Views
- 2,451
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
When I made this, I was learning blender, so my topology is HORRIBLE! But it prints well. I had used a modifier that rebuilds an object, and i ran out of “undos” and couldn't revert back.
Since WE desert eagles (non L6) aren't spec'd to Weaver style mounts, I decided to make my own!
The WE Desert eagle doesn't use true Weaver mount spacing for the rail, so I used calipers to exactly measure the two notches, it should fit all WE Desert Eagle non L6 models
Overture PETG is what I used, so you'll have slightly different settings with other brands.
Printer used is Ender 3 pro
Infill: 65% (it is airsoft, so it's not going to need THAT much strength)
fan speed was at 50%
Nozzle: 240c
Bed: 70c
Print speed 40mm/s
-Infill speed 40mm/s
I used a brim with support generation
You're free to modify, re-upload, sell or whatever with this model
I plan on remaking this and uploading a v2 of sorts