WE airsoft Desert Eagle rail to Picatinny adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Use this to add unneeded scopes onto an airsoft pistol :D
- Ocena
- 0 / 5
- Polubienia
- 30
- Pobrania
- 205
- Wydruki
- 1
- Wyświetlenia
- 2446
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
When I made this, I was learning blender, so my topology is HORRIBLE! But it prints well. I had used a modifier that rebuilds an object, and i ran out of “undos” and couldn't revert back.
Since WE desert eagles (non L6) aren't spec'd to Weaver style mounts, I decided to make my own!
The WE Desert eagle doesn't use true Weaver mount spacing for the rail, so I used calipers to exactly measure the two notches, it should fit all WE Desert Eagle non L6 models
Overture PETG is what I used, so you'll have slightly different settings with other brands.
Printer used is Ender 3 pro
Infill: 65% (it is airsoft, so it's not going to need THAT much strength)
fan speed was at 50%
Nozzle: 240c
Bed: 70c
Print speed 40mm/s
-Infill speed 40mm/s
I used a brim with support generation
You're free to modify, re-upload, sell or whatever with this model
I plan on remaking this and uploading a v2 of sorts