The Toadstool Shop Stool
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The Toadstool is a light, sturdy stool that's perfect for use in your maker space, wood shop, lab, or casual office.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 20
- Makes
- 0
- Views
- 152
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The Toadstool is a light, sturdy stool that's perfect for use in your makerspace, wood shop, lab or casual office. With a seat at a comfortable height of 21", it's just right for hands-on work, yet short enough to slip under a standard work table. Apply a light coat of spray paint to add some spark to the room.
Instructions
The enclosed STL file was created in a modeling app then imported into Fusion 360. That was played with to arrange the panels to balance its appearance with sturdiness, and to fit in my laser's bed.
The version shown was burned on a Full Spectrum Gen5 Hobby laser cutter from a sheet of 0.177" Baltic Birch plywood.
The material you use will almost certainly have a different thickness. So be sure to adjust the cut width in the 123D Make file and export your own cut plans. Use the enclosed cut plans only if your material stock is also 0.177" (+/- 0.01").