Stanley Rolling Workshop New Handle
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Can just about fit this on a prusa mini
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 12
- Makes
- 0
- Views
- 191
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
This is a replacement handle for my colleagues toolbox which suffered the catastrophic effects of gravity while on a building site.
It requires you to drill or grind away the rivet holding the stem of the original handle off.
The replacement handle will be bolted on with an m4 or m5 nut and bolt, but theres nothing to prevent you using a rivet if you have one long enough.
Supports will be a necessity with this one. Refer to the gcode file for orientation. The gcode file is the none input shaper version, with input shaper you can shave a good 4hrs off the print time.
Use PETG and make sure you have more than a quarter of a spool and a spare 6hrs (if your using the Mini Input shaper Firmware that is)