Magnetic Rods for anycubic linear plus
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Update 7-march 21 : Just added a new version shorted with 10mm width between magnet. Just a expiremental test, i'm try…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 21
- Makes
- 0
- Views
- 290
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Anycubic Parts & Upgrades
- License
- Creative Commons — Attribution
Update 7-march 21 :
Just added a new version shorted with 10mm width between magnet.
Just a expiremental test, i'm try to print my own rods to accommodate 10x5mm magnets.
I know that for a delta kinematics acuracy its very, ..very import to have all the rods exactly with the same dimension in a milimeter scale. Special each pair of rods should be exactly the same. However I notice that the original rods dimenstion is not particular accuraded.
For that reason i'm trying to create my own rods. I'm run a couple of tests to see if it will be usable. I know that will some variances in printed part dimensions, due the fact that is a 3D printed part. However as i mention the original ones have also some variances in since (not to mention the play of the eye ball bearing)
I try some version but
Specs :
- 267mm lenght
- 10x5mm magnets (N52)
- 10mm mag balls
Print Settings
Printer Brand:
Anycubic
Printer:
Kossel
Rafts:
No
Supports:
No
Resolution:
200
Infill:
20
Filament:
PolyMaker PLA
Notes:
I've design it to be printed with a 6x wall line.
Category: 3D Printer Accessories