1 / 7
Flipper Zero - CC1101 Board by TehRabbitt - Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A case for the CC1101 Board by TehRabbit - Flipper Zero module
- Rating
- 5 / 5
- Likes
- 24
- Downloads
- 113
- Makes
- 1
- Views
- 1,264
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial
A quick case I put together to fit the CC1101 expansion board made by TehRabbitt. The board can be purchased on Tindie here. The board is designed to be used with the Flipper Zero, which can be found here.
To assemble the case, you'll need two M2x10mm screws and two M2 nuts.
This design also has a pin protector boot cover that can be found in the following locations:
- https://www.printables.com/model/606839
- https://www.thingiverse.com/thing:6123576
- https://github.com/CodyTolene/3D-Printing/tree/main/Flipper%20Zero%20-%20CC1101%20Board%20by%20TehRabbitt%20-%20Case%20Pin%20Boot%20Cover
My print settings:
- Hatchbox PLA
- 0.2mm layer height
- 0.4mm nozzle (line width)
- Enable retraction
- Wall count 3 (+ print thin walls enabled)
- Top/bottom layers: 4
- Infill density: 20%
- Infill pattern: Cubic
- Print temp 210 C
- Bed temp 20 C
- No supports needed
See more designs on my GitHub here: https://github.com/CodyTolene/3D-Printing
Enjoy!