Switch housing for 22mm handlebar
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Attaches basic automotive switch to 22mm bars
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 56
- Makes
- 0
- Views
- 601
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
Should fit your cheap automotive switch found in auto parts store. I used BL brand switch from Puuilo
Internal dimensions for space for the switch:
18mm x 31mm, height 32mm
Switch hole diameter 12mm
You need to drill your own hole to the cover part. I drilled and attached rubber passthrough for the cable I had.
Uses m4 hardware
I didn't use supports and printed so that the top surface of switch box is facing the build plate.
Printed with ASA. ABS/PET-G/PA-CF should be ok aswell
Has worked for me so far. You can use the switch even if going through some rough terrain. I use it for auxiliary lights in Tenere 700.