Extruder Wheel/Knob Connector for SV06
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.10 – €0.12 net (excluding VAT)
For file: extruder_wheel_stem_95percent_0.15mm_PLA_SV06_8m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.11 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 7.8 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A press-fit connection for SV06 extruder wheels/visualizers.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 31
- Makes
- 0
- Views
- 195
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
A stand-alone connecting stem for the Sovol SV06 extruder wheel.
Couldn't find one by itself on here and it's a relatively simple part to cook up, so here we are.
IMPORTANT: The model is slightly oversized by design, so you can shrink it to get a snug fit. No two printers are the same, but the print file has the settings I used.
In my case, printing in PLA with a 0.4mm nozzle at 0.15mm layer height 95% scale was a perfect press fit. The included gcode file has these settings.
I'd recommend printing a few different sizes at a time at half height (or just stopping the print halfway through) to find the right scale for you, as it's a really quick print anyways.