Extruder Wheel/Knob Connector for SV06
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A press-fit connection for SV06 extruder wheels/visualizers.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 195
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
A stand-alone connecting stem for the Sovol SV06 extruder wheel.
Couldn't find one by itself on here and it's a relatively simple part to cook up, so here we are.
IMPORTANT: The model is slightly oversized by design, so you can shrink it to get a snug fit. No two printers are the same, but the print file has the settings I used.
In my case, printing in PLA with a 0.4mm nozzle at 0.15mm layer height 95% scale was a perfect press fit. The included gcode file has these settings.
I'd recommend printing a few different sizes at a time at half height (or just stopping the print halfway through) to find the right scale for you, as it's a really quick print anyways.