1 / 5
Vinyl Fencepost rail jigs and covers — image 1
1 / 5

Vinyl Fencepost rail jigs and covers

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Jigs to route rail holes in vinyl fenceposts; covers for old rail holes

Rating
0 / 5
Likes
5
Downloads
64
Makes
0
Views
315
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

When we built our house, we didn't think we'd need a gate in the privacy fence, but later changed our minds. My builder charges over $800 for a gate, and they use some proprietary rail sizes that I couldn't find anywhere.  So I decided to repurpose an existing 3-ft section of fence to make my own gate:
- I bought 2 new 4x4" vinyl posts for the gate uprights which needed new holes for the old fence rails. I clamped the jigs in place and a top-bearing flush trim bit to route out the holes. 
- The existing 5x5 fence posts became the gate posts with the addition of 5x5 aluminum stiffeners and gate hardware. I covered the old rail holes with these custom PETG covers.
-  I designed the jigs and covers in F360 using parameters so you could modify the .f3d files if you need different sizes. I also designed the gate in F360; let me know if you want that file.
- Total cost was less than $250 and a few days work.

Jig Settings:
Filament Prusament PLA
Nozzle 0.6
Layer 0.35mm
Supports no
Fill 10% gyroid
Perimeters 2
Temp 215

Cover Settings
Filament Generic PETG
Nozzle 0.6
Layer 0.20mm
Supports no
Fill 15% gyroid
Perimeters 2
Temp 230C/240C

Tags