Handle for anglegrinder disk
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Handle to put on angle grinder cup disks - Diamond cup disks and such.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 13
- Makes
- 0
- Views
- 125
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
Handle to make it possible to use a diamond grinding disk to manual sand an area. In my case I used it to remove high spots on a wall before applying waterproofing.
Fits the standard size 22.23mm/ 7/8" hole -
Made so that a 10mm nut can be inserted into the print during the print. Make a color change at 36.0mm height and insert the nut. The print is a bit tight so it is recommended to heat the nut before pressing it in. It should be able to melt its way into the hole. I would estimate that the nut should be around 200-240 celsius.
Use a big washer and a M10 bolt to bolt the disk onto the handle.