Magnetic Tiles Haunted House: Light
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Here are the light base and light shade pieces for the magnetic tile haunted house.
- Rating
- 0 / 5
- Likes
- 55
- Downloads
- 116
- Makes
- 0
- Views
- 1,101
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Engineering
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Here are the light base and light shade pieces for the magnetic tile haunted house.
PLA Filament
Layer height 0.2mm
Infill 15-20%
No brims or supports needed
Neodymium magnet size need for pillars: 7x2 OR 6x2 OR 6x3 OR 5x3
Magnetic build plate highly recommended but not absolutely necessary.
I designed these to be used with 7x2 OR 6x2 OR 6x3 OR 5x3 (lots of options) neodymium magnets (nothing wider than 7mm or thicker than 3mm). I strongly recommend using these size magnets. These magnets do not have space to rotate. This piece, as well as the window boards, are the only pieces designed this way BUT all the other magnets in my designs rotate so they will orientation to the magnets in these pieces.
For the light base, add a pause print at layer height 13.6mm to insert the magnet. When the print is paused insert the magnet. After the magnet is inserted, resume the print.
For the light shade, begin the print with yellow (or whatever color you choose). Add a pause for filament color change at 0.6mm. After filament change is complete, resume print. When the light shade is done printing fold along seams and slide flaps together so they lock together on the inside of the shade. Slide the shade into base, add a light and you're done:)
Here is a link to Amazon for the light and magnets that fit into this print.