1 / 5
Flsun V400 - Beefy Idlers
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A beefier idler holders for V400.
- Rating
- 0 / 5
- Likes
- 40
- Downloads
- 143
- Makes
- 0
- Views
- 1,211
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
A beefier version of idler holder for V400.
What's better?
- Adds space between the idler pulley so there's a room for self-alignment, so the sides of the belts are not being rubbed on by side rim of the pulley
- Allows to use a sexton screws or pins directly. Stock idlers are using screw + tubes
- Adds rim on top, so you can use weight based tensioner easily
Print in PETG, 40% infill at least. If you're using enclosure, ABS or ASA is recommended.
There's a build in support that you need to remove with pliers.
BOM:
- 30mm pin or sexton screw, 5mm shaft diameter. Or 35mm M5 screw + M5 nut (not recommended)