The Ultimate Silica Desiccant Box - Fully Printable
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I wanted to create a high capacity, 100% printable box for storing bulk silica gel desiccant. A lot of the designs I…
- Rating
- 5 / 5
- Likes
- 47
- Downloads
- 370
- Makes
- 6
- Views
- 1,290
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
I wanted to create a high capacity, 100% printable box for storing bulk silica gel desiccant. A lot of the designs I looked at required extra hardware, were too small, and had holes too big for the smallest gel beads. I designed this with 1.5mm slots so even the smallest 2mm gels will not fall through the cracks.
This box lowered the humidity in my dry box from 48% to 16% in just a few hours. I plan to use a strong tape to attach this to the underside of my dry box lid, which is why I left the bottom of the box solid.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
100% for screws/top, 20% for bottom box.
Filament: Atomic PLA White Post-Printing =============
I would recommend putting the screws in while the box is empty, as the first rotation requires a little extra force. Once you've inserted the screw once the second time is much easier. rnrnFill with any bulk silica gel. I used this one: http://a.co/d/gj187i4
Category: 3D Printer Accessories