The Ultimate Silica Desiccant Box - Fully Printable
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted to create a high capacity, 100% printable box for storing bulk silica gel desiccant. A lot of the designs I…
- Ocena
- 5 / 5
- Polubienia
- 47
- Pobrania
- 370
- Wydruki
- 6
- Wyświetlenia
- 1290
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
I wanted to create a high capacity, 100% printable box for storing bulk silica gel desiccant. A lot of the designs I looked at required extra hardware, were too small, and had holes too big for the smallest gel beads. I designed this with 1.5mm slots so even the smallest 2mm gels will not fall through the cracks.
This box lowered the humidity in my dry box from 48% to 16% in just a few hours. I plan to use a strong tape to attach this to the underside of my dry box lid, which is why I left the bottom of the box solid.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
100% for screws/top, 20% for bottom box.
Filament: Atomic PLA White Post-Printing =============
I would recommend putting the screws in while the box is empty, as the first rotation requires a little extra force. Once you've inserted the screw once the second time is much easier. rnrnFill with any bulk silica gel. I used this one: http://a.co/d/gj187i4
Category: 3D Printer Accessories