1 / 3
Quest 3 - Deluxe audio strap adapters.
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapters to use a HTC Vive deluxe audio strap on a Meta Quest 3.
- Rating
- 5 / 5
- Likes
- 74
- Downloads
- 846
- Makes
- 6
- Views
- 4,535
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Virtual Reality
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Adapters to use a HTC Vive deluxe audio strap on a Meta Quest 3 headset.
Curved version (1.5) should be very close in fitment. However if you have issues printing them and rather use the flat version you can aswell, heat them so they are soft and mold them to the headset.
Version shown is printed with PLA, 60mm/s with support. Heated afterwards to make them sit nicely on the headset.
Version 1.5
- Minor changes to the right side of the USB port.
- Minor change to the positioning of the audio port.
- Added smaller scale versions for each. (these only scale the groove for attaching the adapters to the quest 3)
Version 1.4
- Bottom groove redesign. (Similair to the original strap)
- Curve should be properly matching.
Version 1.3
- Full overhaul
- Curved versions added.
- STL resolution increased.
- Attachment points for the curved versions should be in to proper spots.
- Fitment should be close but not perfect. (If you run into issues with them being to small scaling them a fraction will help)
Version 1.2
- Moved the attachment points back 5mm so angled USB-C cables fit better.
- USB-C and Audio port should now be spot on all around.
Version 1.1
- Minor adjustments to allow easier attachment.
- Made the top slightly thicker.
- Better fitment around the usb-c and the audio port.
- Overall minor changes to smooth out some edges.
Version 1.0
- Initial release.