Ender 3S1 (Pro) Tool Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tools holder for Ender 3S1 / Pro
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 76
- Makes
- 0
- Views
- 422
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Want to have the most used tools handy when printing? Keep them together where you need it. This holder is mounted on top of the Z lead screw support either left or right one according to your convenience.
The model can hold the Creality metal scrapper, the plyers and the custom plastic scrapper (see at the bottom).
The design is optimized for 0.4 and 0.6 nozzles.
Printing instructions:
- print in the orientation of the stl file
- layer height: 0.2mm
- perimeters: 2 (for 0.6 nozzle) 3 (for 0.4 nozzle)
- infill: ≥ 15%
- supports: needed some - see the picture. Tree or organic recomended.
- material: PLA, PETG (I used PolyMax PLA)
- Note: it's a tight fit. If your printer isn't very well calibrated, scale the model to 101% in slicer
The plastic scrapper is made by Jocker here: https://www.printables.com/model/576009-scrape-measure-print-bed-scraper
Note that I scaled the scrapper on Z axis to 50% since I considered the original thickness didn't added any benefits. Therefore if you have the original model it won't fit in it's slot.