LattePanda Case with Heatsink Support
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This model was created for King's Dharma, a multimedia production. It fits a LattePanda with heatsink/fan installed.…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 44
- Makes
- 0
- Views
- 322
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
This model was created for King's Dharma, a multimedia production.
It fits a LattePanda with heatsink/fan installed. There are cut outs for HDMI, USB and power. The top case has room for a lithium ion battery too.
The case is held together with zipties.
Theoretically, a 2000mAh 1S Li-On cell can be secured in the cover. With a voltage boosting circuit, the LP could be powered for approximately 20-30minutes depending on the load.
Print Settings
Printer Brand:
Creality
Printer:
CR-10
Rafts:
No
Supports:
Yes
Resolution:
.2
Infill:
20%
Filament:
Inland PLA/ABS
Notes:
Tested in PLA but the Lattepanda may get too hot and will require PETG or ABS.
Category: Electronics