LattePanda Case with Heatsink Support
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model was created for King's Dharma, a multimedia production. It fits a LattePanda with heatsink/fan installed.…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 322
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
This model was created for King's Dharma, a multimedia production.
It fits a LattePanda with heatsink/fan installed. There are cut outs for HDMI, USB and power. The top case has room for a lithium ion battery too.
The case is held together with zipties.
Theoretically, a 2000mAh 1S Li-On cell can be secured in the cover. With a voltage boosting circuit, the LP could be powered for approximately 20-30minutes depending on the load.
Print Settings
Printer Brand:
Creality
Printer:
CR-10
Rafts:
No
Supports:
Yes
Resolution:
.2
Infill:
20%
Filament:
Inland PLA/ABS
Notes:
Tested in PLA but the Lattepanda may get too hot and will require PETG or ABS.
Category: Electronics