PiVPN - Raspberry Zero Wireless case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Decided to make small simple casing for Raspberry Pi Zero 2 W, running PiVPN wirelessly.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 24
- Makes
- 0
- Views
- 170
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
First things first. Case has only two openings and they're
- USB Power, should fit beefy connectors quite well
- SD Card slot opening
Print 100% infill, flat sides to bed obviously. Bottom panel can be fixed with preferably M2.5x10 countersunk screws or some other similar diameter countersunk screw as holes are blind. 3mf and stl files included.
Thought about making small switch hole to CSI port end for shutdown switch, but decided against it as there's too many switch models to use and it's just easy to drill hole for them if needed.
Oh and I know, my pictures print had a lot of black filament, so I'll re-print the parts near days. But tested functional :)
PiVPN Project
https://www.pivpn.io/