1 / 2
Prusa Mini X stepper cable protection (remix) / Zajištění vývodů Motor osy X (remix) — image 1
1 / 2

Prusa Mini X stepper cable protection (remix) / Zajištění vývodů Motor osy X (remix)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Remix originálu od uživatele Haltmar, jeden šroubek, obepíná motor vcelku

Rating
5 / 5
Likes
6
Downloads
67
Makes
3
Views
447
Reviews
2

Updated at source:

Model information

License
Creative Commons — Attribution

CZ: (EN version follows)

Na jinak skvělém modelu se mi nelíbilo “vypučení” na druhý šroubek. Rozřezáno a slepeno v Tinkercadu, tištěno v PLA (0,2 mm, 15% infill, límec, bez podpěr).  Přichyceno 1x šroub M3x15 s matkou.

V rámci běžné údržby jsem pak pootočil motor osy X tak, aby svazek kabelů směřoval vzhůru. Svazek je tím mnohem méně namáhán (zejména v dolní poloze).

EDIT: Přidal jsem model s větší mezerou mezi ploškami, aby nedocházelo k nechtěnému spečení při tisku

EN: On the otherwise great original I did not like the second “lip” for second screw. So I fused it together to make one collar. Printed in PLA (0,2 mm, 15% infill, brim, no supports). To mount it you will need M3x15 screw (hex head) and a M3 nut.

On my Mini I turned the X stepper anti-clockwise to route the cable upward, as seen on pictures. This should prevent any unnecesary bending.

EDIT: 2025/05/09 - I added model with bigger gap to prevent unwanted fusing of the pads.

Tags