1 / 3
AEG/Elecrolux dishwasher Favorit - repair set
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Some parts from inside the dishwasher that are often damaged after several years of use: Wheels, tray stops,..
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 41
- Makes
- 0
- Views
- 551
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Please do not use regular PLA, because it may soften during dishwashing. Use PETG (in my case it works for about 2 years) or any other material that sustain some chemicals and temperature about 70C. (ASA, PP or Nylon might be good candidates - I haven't tested it yet)
- To print wheel holder, print it horizontally (as is in stl) with support for wheel pivot. (Printing it rotated upward leads to latches breaking). It works for lower and upper basket wheels. Can be combined with original wheels if they are still usable.
- The tray stop can be printed as is. If your model needed wider trays stop, then go to https://www.thingiverse.com/thing:3591108/files
- To get the lower basket wheel, go to https://www.myminifactory.com/object/3d-print-dishwasher-lower-basket-wheel-10080
I plan to add few more parts (or links) as other parts gets damaged… :-)