1 / 1
Basil Hook-On system - Hook
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial
Replacement Hook for the Basil Hook-On system used by BASIL on their rear bicycle bags.
Tested with 10kg load in the bag on a short ride. (Please note every bag has two of these hooks)
I did it this way (Print suggestion):
- PETG
- 6 Walls. Important to make most parts of the hook solid.
- 4 Top and 4 Bottom Layers
- 0.2 Layer Height
- 25% Infill - Grid pattern. (not really needed as there is no mechanical stress on the parts where the infill will be if you choose 6 walls.)
Filament used with the above settings: ~14g