Connector end from Micro USB DIP breakout
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Turns a dirt-cheap USB micro breakout board into a custom connector port for powering projects
- Rating
- 4.667 / 5
- Likes
- 15
- Downloads
- 115
- Makes
- 3
- Views
- 733
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
I wanted to use DIY 18650 powerbanks to power a few small things around the house, like a small flashlight and strings of decorative LED lights. I had of few of these boards lying around leftover from a project, and I soldered wires just to the GND and Vbus ends. This way I can USB power small things using the dozen extra USB-micro cables that I, and I'm sure everyone else has lying around, and now I won't need to purchase or make a bunch of different connectors.
I used M3x6 screws because that's what I had, but something with a flatter head would probably be better.