Connector end from Micro USB DIP breakout
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Turns a dirt-cheap USB micro breakout board into a custom connector port for powering projects
- Ocena
- 4,667 / 5
- Polubienia
- 15
- Pobrania
- 115
- Wydruki
- 3
- Wyświetlenia
- 733
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
I wanted to use DIY 18650 powerbanks to power a few small things around the house, like a small flashlight and strings of decorative LED lights. I had of few of these boards lying around leftover from a project, and I soldered wires just to the GND and Vbus ends. This way I can USB power small things using the dozen extra USB-micro cables that I, and I'm sure everyone else has lying around, and now I won't need to purchase or make a bunch of different connectors.
I used M3x6 screws because that's what I had, but something with a flatter head would probably be better.