V-block Prisma bracket for K&M note stands
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fits the K&M note stands whose serial numbers begin with "118/". I believe it should also fit 10068 and 11920.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 22
- Makes
- 1
- Views
- 158
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Attribution — Share Alike
This fits the K&M note stands that use their V-block/prism attachments. While I do not know the exact serial number for the unit I was repairing when I designed this, I believe it is used on the “118/”-series note stands as well as a few others like 10068 and 11920.
For assembly you need two DIN 603 (ISO 8677) carriage bolts of size M5x45 with corresponding washers and nuts. I used nyloc nuts. Tightening of the nuts requires a socket wrench with outer diameter 12mm or less (which is what mine is, I think it's pretty common; if not, let me know and I can make some adjustments to allow use of crescent wrenches too).
I provide two versions of the model. The first closely matches the footprint of the original bracket (with some adjustments to make it 3d printable). The second one is a bit meatier compensate for the strength of a 3d printed part compared to the original metal one.
Both should be printed with the small end of the wedge (the one that is mounted facing vertically upwards) onto the print bed.
I printed mine in PETG with 0.4mm layer height and a 0.8mm nozzle. I used 15% infill and 3 vertical walls, and it feels very solid.