BBL Spool Desiccant Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is to add reusable Silica Gel inside a spool and then vacuum bagged. The Contain is Ø53mm x 59mm high
- Rating
- 5 / 5
- Likes
- 44
- Downloads
- 463
- Makes
- 7
- Views
- 1,527
- Reviews
- 7
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
This is a desiccant holder originally made for BBL Spool and then vacuum bag. It should fit and spool with a 54mm ID and 60mm width.
I used Dry & Dry [2 LBS] Blue Premium Indicating Silica Gel Beads(Industry Standard 3-5 mm) - Reusable Desiccant Beads Silica Gel Desiccant from https://www.amazon.com/dp/B013L31PQ0?ref=ppx_yo2ov_dt_b_product_details&th=1 for the desiccant
Printed in PLA but any other tuned filament should work.
0.4mm Nozzle
0.20mm Layer Height
6 Walls
Directions
No Supports needed
Printed on Bambu X1c with Generic PLA Profile, Bambu PETG, and Polymaker ASA, printed in 2hrs
I found that ASA works best. and print the part by object.