Cylinder for the Rekt Jury Blaster
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement cylinder for the Rekt Jury foam dart blaster
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 102
- Makes
- 0
- Views
- 476
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution — Noncommercial
I modelled a replacement cylinder for the Rekt Jury.
You will need to print the cylinder open end down with organic supports ( I use automatic painting). The nub does not need supports.
You will also need a 25mm m3 pan head screw (hex head won't work as the head is too big)
Approx 8mm of 5mm diameter spring (anything that fits over the screw really).
There is a slot inside the nub so you can hold it still while screwing from the back. Only screw it until it is flush with the face.
I welcome feedback as I am still improving this model. I often wondered if a 3D printed cylinder would work and it appears it does :-). Time will tell how long the rotation nubs last on the back of the cylinder but they seem fine so far.
Update 2 (11/01/24):
I updated the cylinder again because sometimes it failed to rotate fully and click in position. This now looks to be resolved.
Update:
I added a new cylinder file. This one has much bigger chamfers on the dart holes for better location and fractionally bigger rotation nubs to rotate the cylinder a touch further which helps when you pull the trigger really slowly.