Magnet Rod with Extender Beam
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Magnet rod to pick up metal objects stuck in narrow spaces. 15 x 15 x 200 mm, uses four 6 x 3 mm magnets.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 34
- Makes
- 0
- Views
- 196
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
I dropped a socket into a narrow space and needed a long, thin rod with magnets on the end to pick it up. It can of course be extended with more extender beams. I used CA glue to glue each part together.
Printed in roughly 3 hours on a Bambu Labs P1P with Overture White PLA
Layer Height: 0.20mm
Infill: 15% gyroid
Brim on, no supports, standing upright. Print with 3 walls for extra strength, though 2 is generally enough. I used Arachne wall generation and outer/inner/infill print order, and 0.2 mm tolerances are built into the magnets and female slots on each rod, so you may need to glue/tape things together depending on your printer.