HDZero Goggle Rail Cold Shoe Mount
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.57 – €0.69 net (excluding VAT)
For file: rail-coldshoe-mount-right.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.63 excluding VAT (range midpoint).
- Weight reported by the author
- 6 g
- Print time reported by the author
- 43.2 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Cold shoe mount for the HDZero FPV Goggles
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 51
- Makes
- 0
- Views
- 473
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Addition for the HDZero Goggles, to add a cold shoe mount via the front rails.
Enables you to use cold shoe compatible microphones such as the Rode VideoMicro.
There are two files, as the cold shoe mount is rotated 7.5 degrees relative to the rails in order to point directly forward.
The right hand mount is for the cold shoe at the top of the goggle from the perspective of the wearer. Vice versa for the left hand mount. If you want the cold shoe at the bottom of the goggles then use the opposite handed model and simply mount it upside down.
Use your slicers lay flat command or rotate it by 7.5 degrees so that the flat edge sits flush with the build plate.