Silica Basket for Filament Spools
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€2.29 – €2.80 net (excluding VAT)
For file: Silica_basket_with_lid_0.4n_0.2mm_Super_PLA+_MK4IS_2h55m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.54 excluding VAT (range midpoint).
- Weight reported by the author
- 24 g
- Print time reported by the author
- 2.92 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Here's a basket made to hold 3-5mm silica gel beads that fits nicely into the hole in standard 1kg filament spools.
- Rating
- 5 / 5
- Likes
- 12
- Downloads
- 113
- Makes
- 2
- Views
- 509
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
I keep the filament spools I'm not currently using in 11 inch vacuum sealed bags. The void in the hole of the spool isn't evacuated, so some air still remains in the bag. Instead of buying silica packets and ignoring the hole, I created a basket to contain silica gel and sized to fit inside the hole to also fill the void when vacuum sealing the spools.
The lid slips inside the basket and makes a nice tight fit. A little bit of sanding on the lid and inside of basket makes for a very smooth snug fit. Overall dimensions are 66mm (H) x 54mm (Dia). Interior volume is approx. 120mL (35-40g silica gel beads).